Does your Windows 10 PC not detect even after you insert a device into the USB port? Does none of our devices work while being connected through the USB connection port? A lot of users face the same problem after a Windows 10 update of their system. This article would present solutions to your problem of USB Ports not working in Windows 10.

Why do USB Ports not working in Windows 10?

Though there are not plenty of reasons why the issue of USB Port not working in Windows 10 takes place. However, the following could be the potential reasons for this problem:

1. Power management settings try to save power by switching off the USB controller.

2. Device drivers are corrupted or outdated.

3. The USB Port is defective.

How can you Fix USB Ports not working in Windows 10?

As we have discussed above, many users face this problem of USB Ports not working in Windows 10 after a Windows 10 update in their system. We also discussed this issue’s potential reasons. Since we now know the reasons, we present a list of solutions to fix this issue:

Solution 1: Disable and Enable USB Controllers to Fix USB Ports not working in Windows 10:

To disable and enable USB controllers, follow the steps mentioned below:

1. Firstly, open the Device Manager from the Windows Start button.

2. Next, select the Universal Serial Bus Controllers under various device options.

3. Now, right-click on the USB device mentioned in your PC and click on Disable device or the Enable device option to disable or enable the USB Ports in your device.

Solution 2: Disable the Power Management to Fix USB Ports not working in Windows 10:

To disable Power Management, follow the steps given below:

1. Firstly, you need to open the Device Manager from the Windows Start menu.

2. Next, select the Universal Serial Bus Controllers under various device options.

3. Now, you need to right-click the USB Root Hub for the data card and then click on Properties.

4. Next, from the Power Management tab, make sure that the “Allow the computer to turn off this device to save power” is not checked. If it is, then uncheck it and then click OK.

Solution 3: Re-install USB Controllers

You can re-install USB Controllers b using the following steps:

1. You first need to open the Device Manager from the Windows Start menu.

2. Next, select the Universal Serial Bus Controllers under various device options to expand it.

3. Now, from the Universal Serial Bus controllers listing, click on the appropriate USB listing.

4. Now, go to the Menu Bar and click Action and then click Uninstall.

5. Finally, click the OK button in the Confirm Device Uninstall window and restart the computer.

Solution 4: Use the Device Manager

Using the Device Manager, you can solve the problem of the USB Port not working in Windows 10 by updating the device drivers using following the subsequent steps:

1. Firstly, open the Device Manager from the Windows Start menu.

2. Now, select the device that is connected to your USB Port from the devices list.

3. Now, right-click the selected device to update its software.

4. Next, select the Search automatically option for updated driver software.

5. Finally, tap the Update Driver button.

You can also scan the Hardware changes from the Device Manager, whose steps are discussed further in the article.

Solution 5: Check whether a USB device is working properly

You can check whether the USB device is working correctly or not by following three methods, whose steps have been discussed in these solutions themselves.

1. By scanning for hardware changes.

2. By enabling and disabling USB Controllers.

3. By restarting your computer.

Solution 6: Disable the Fast Startup option

You can turn off fast Startup b following these steps:

1. Firstly, click the Windows Key + R combination to open the Run dialog.

2. Now, type powercfg.cpl in the dialogue box and press Enter.

3. Now, the Power Options window would appear. In it, click “Choose what the power buttons do” from the left pane.

4. Next, scroll down till the “Shutdown settings” option appears and uncheck the box for “Turn on fast startup.”

5. Finally, you can now click the Save changes button to apply the changes.

Solution 7: Scan for Hardware Changes

Scan for hardware changes by following the given steps:

1. Open the Device Manager from the Windows Start button.

2. Next, in the Device Manager, click your computer so that it gets highlighted.

3. Now, select the Action button, and then click on Scan for hardware changes.

4. Finally, you can check the USB device to know if it is working or not.

Solution 8: Disable USB Selective Suspend

You can disable USB Selective Suspend using the following steps:

1. Firstly, press the Windows + X key combination.

2. Now, click on the Power Options.

3. Next, select the Choose when to turn off the display option in the Power Options menu.

4. Further, open the Change advanced power settings and expand the USB settings and USB selective suspend setting by selecting it.

6. Now, click on the Enabled or Disabled option and then click the Apply button, followed by the OK button.

Frequently Asked Question

Q1. Can detect USB but cannot open?

Answer: This problem could be due to your outdated driver software yours. You can follow the given steps to update your driver’s software so that you can solve the issue of USB not opening even after being detected:

1. Firstly, open the Device Manager from the Windows Start menu.

2. Now, select the device that is connected to your USB Port from the devices list.

3. Now, right-click the selected device to update its software.

4. Next, select the Search automatically option for updated driver software.

5. Finally, tap the Update Driver button.

Q2. How to fix a dead USB?

Answer: You can repair the USB Flash Drive or a dead USB using the following steps:

1. Firstly, you need to open the File Explorer and then select This PC option.

2. Next, in the This PC menu, right-click your USB flash drive and select Properties.

3. Now, go to Tools and click the Check option.

4. Finally, select the Scan and repair drive option.

5. Now, wait until Windows repairs your USB flash drive.

Q3. Is it possible to format a USB drive without losing data?

Answer: Yes, you can format your USB drive without losing data. However, it is highly suggested that before performing the formatting process, you should backup all the data and files of our drive.

4. Why do Windows ask me to format my USB drive?

Answer: Your Windows is asking you to format your USB drive because the Flash Drive partition file system might be corrupted. And because of this, the Windows might be unable to recognize any of the damaged files. So in order to detect the damaged file, Windows repairs the drive by formatting it.

Q5. Why I Cannot delete files from USB?

Answer: You are not able to delete files from your USB because some file in it is either opening or is already running. Try closing the file and then delete it.

Conclusion

We hope that the article has been able to provide the necessary solutions to fix the problem of USB Ports not working in Windows 10. However, if you find that the problem persists even after following all the solutions, you may connect with us via the below chat box.