(Solved) Black Screen Problem in Windows 10 – 2021? Then you can use this guide to fix this troubleshoot issue. On Windows 10, one of the most annoying problems that the user can stumble upon is a black screen problem. Due to this problem the user won’t see an error code or message printed on the screen. Or they didn’t get a hint on where to start troubleshooting.
The Black screen problem can occur due to various reasons. Sometimes it might be related to an issue with a graphics driver update or could occur during the installation of a feature update. It could also happen as a buggy system update. Or it could be a hardware related issue with the display, connection, or video adapter. Whatever the reasons maybe there are several ways to fix this issue and solve the problem permanently
Usually, various reasons cause the black screen problem in Windows 10 and they are:
1: A Window Update went wrong.
2: A graphics-card Window driver.
3: A hardware defect.
4: Looses cables in your PC or laptop
5: Connection error between the PC and the monitor.
6: Errors in startup application that runs automatically.
Reasons for How to solve the black screen problem in windows 10
Quick Navigation:
1: Examine Cables and Connection
2: Force the display to wake up
3: Examine Computer Motherboard for damage
4: Unplug all unnecessary accessories
5: Try using BIOS/UEFI and check the boot order
6: Boot into safe mode
Step 1st: Examine Cables and Connection:
If everything works in a normal condition and suddenly your PC won’t show a screen, then there are chances that there is something wrong with either the cables or monitor. Look at the following ways of how you can check all the essential connections.
1: Unplug and Reconnect video cable:
One of the basic things that you can do is to disconnect and then reconnect all your video cables. The video cables include HDMI, DVI, VGA, etc. It can be possible that dust can get stuck in them so better to unplug it and then plug it again.
2: Try a Different cable:
Cable breaks sometimes and especially when you are using a laptop and an external monitor. While constantly plug in the connectors can wear them out over time. Therefore, to check whether your cable is affected or not you can give a try to a different cable that works well. Somehow if it produces an image then it is time to stop for a new cable for your computer.
3: Make use of a new monitor:
If your device display seems to be defective or if it has been sent to the wrong source, then it can also lead it towards the black screen issue. So, there is a need to connect a different display if you have one. You can also move your monitor for solving this issue.
Sometimes the issue could also be a mismatch for both the monitor and resolution. A PC may not operate well with a projector that is not capable of displaying resolution errors. On the other end, if the PC is showing a boot error then try to hook it up with a regular monitor. Still, if the monitor shows an image then there is a problem of low resolution, which the projector cannot display.
Step 2nd: Force the display to wake up:
Not all the black desktop screen issues in Windows 10 need to indicate serious threats with hardware components. It could be possible that may be your display is not detected by Windows 10. Thus, in this case, you can make use of your keyboard keys to force the display to wake up. For performing this step you need to do the following steps such as:
1: Press Windows Key+ CTRL+ Shift+ B at the same time. By doing this it can restart your computer graphics drivers and resolve the underlying issue.
2: Alternatively press CTRL+ALT+DEL on your keyboard and then click the power button to the lower side of the screen and click restart. In this way, your device will restart without the black screen.
3: It has also been seen that the black desktop screen can be brought by Windows 10 update issues. So, better using the above mentioned key combination and it helps in resolving the problem of the black screen issue.
Step 3rd: Examine Computer Motherboard for damage:
It might be possible that your video card is working perfectly fine, but your motherboard not. Everything in your computer is connected with large circuits. The motherboard helps in interacting and communicating properly.
If you find that there is a short circuit in the motherboard then you might not be able to read or use the attached cards or components. So examine it for any damage and try using a different video card and see if the issue has been resolved or not and if not then better to replace the entire motherboard.
Step 4th: Unplug all unnecessary accessories:
It can be possible that some users plugged in the hard disk, Wi-Fi antenna, and cause the issue during boot. So try to eliminate all these factors and remove everything from your device. All you just need to leave your monitor, mouse, and keyboard plugged in.
If the user is operating a big desktop computer then try to remove all unnecessary components such as sound cards or switch out the graphics cards and Upgrade your RAM.
Step 5th: Try using BIOS/UEFI and check boot order:
To run your PC a core program is required for it. For the older PC’s BIOS and the newer PC’s UEFI is needed. Both of them regulates the basic hardware configuration and make sure to launch the operating system.
If you are getting a black screen error, then revert to default settings. Here is how you can do it:
1: While booting up, you will see a message that asks you to hit a certain key to enter the setup.
2: Most of the time it can either F2 or DEL Key. Thus, you need to hit that repeatedly right after pressing the power button.
3: Now you need to try the two following things:
A: Reset to default settings:
Try to find an entry that says Load Defaults or Optimized Defaults. Both the terms BIOS or UEFI looks different but their wordings are similar. It will reset everything back to default settings in case anything went awry.
B: Ensure PC boots hard disk:
Both the BIOS/UEFI controls the medium from which the PC should start. This can also be a hard-disk, CD/DVD, or USB thumb drive. Ensure this is set to your hard disk and the user will find it under the Boot priority or First Boot device.
Step 6th: Boot device into safe mode: 
The Windows safe mode launches your PC with t he minimum drivers or programs. This will help in avoiding a black screen. The safe mode means the Windows loads up and removes the interference from either a program or a driver.
To go into the safe mode follow the steps carefully:
1: Click on Startup Settings.
2: If you won’t see the settings then click on see more recovery options and then click Startup Settings.
3: Now “Hit” the start button.
4: Press 5 to launch your computer screen in safe mode.
5: Once it is booted up it starts eliminating the potential causes. You can also try at least the two following methods:
6: Uninstall all those applications that could interfere with the boot graphics, drivers, network drivers, etc.
7: Turn off all the startup items by using the Task Manager.
8: Right-click the taskbar and select Task Manager and then go to Startup.
9: Now turn off everything that you will see by right-clicking on each item and “Select Disable”.
10: Restart your system normally. If you see that your screens are working fine then repeat the step above and reinstall everything one by one.
11: Reboot the one item and make sure everything is working well.
12: Repeat the same process with the next item on the list.
Frequently Asked Questions (FAQ’s)
Q1: How you can fix the black screen of Death?
Ans: Both the hardware and driver issues result in a black screen of death. And it can be only repaired through safe mode. If your device is hanging with the black screen, then in that case you need to restart your computer and hold F8 or shift F8. Thus it could boot the computer into safe mode.
Q2: How to start Black Screen in safe mode?
Ans: Learn the following steps of how you can start Black Screen in safe mode:
1: Firstly, press the computer power button to turn your PC on.
2: While the Windows is starting, hold the power button for at least 4 seconds.
3: Now repeat the process of turning your computer on and off with the power button 3 times.
Q3: How to recover files from the Black screen on Laptop?
Ans: Following are been defined some ways to recover files from the black screen on the laptop:
1: Create a bootable CD/DVD or USB flash drive.
2: Now download and install the recovery tool on your device.
3: Connect a blank USD drive or CD/DVD into it
4: Now you can recover all your lost data.
Q4: What gets wrong when the computer screen goes black?
Ans: Most of the user gets a black screen problem from the operating system or an incorrect display driver. Although you don’t need to install anything just run the disc until it gets display on your desktop.
Q5: What causes a Black screen with a cursor?
Ans: The Black screen can be caused by having a separate graphics card. In most cases, the system thinks that your device has got a dual monitor. Therefore you need to disable the integrated graphics card and fix the problem. For disabling the graphics driver you need to open the Device Manager in Windows.
Final Words: Look at the above following steps and perform it an appropriate manner and see how it works in solving the Black screen problem. Consider these above steps and fix the issue of black screen problem in Windows 10. This guide help you in solving your black screen issues! But if all else fails then you might need to re-install the Windows from scratch as the issue can be more serious.
You also need to keep your system fresh and maintain it weekly and thus it helps in preventing the issues like Black screen problem. Still, if your problem doesn’t get resolved then you can contact us via chat we surely help in fixing this problem and your device starts running smoother.