If you have purchased a Linksys router for establishing an internet connection with your computer or laptop, then maybe you have faced setup problems with your Linksys router and are trying to find a solution for, “How to set up a Linksys router?” Don’t worry here; you will get an effective solution for configuring or setting up Linksys router. 

No doubt, Linksys is a most popular router brand, despite its popularity, sometimes users are not able to set up this device at their professional or personal space. In that case, you must require a little help to accomplish this process.

Types of Linksys router

Before starting the Linksys router setup procedure, you must know what types of routers are available in the market so that you can easily buy it according to your requirements. A little information about the Linksys router is quite helpful in its setup process, let’s start.

Linksys WRT54G

It is the most popular type of Linksys router supporting 802.11g, b and standards, and 54MB/second throughput rate. When this router came into existence at an initial stage, it was hit by various review sites because of its reduced range, but this issue was overcome very soon by a router firmware update. Whenever you purchase this router, it is included with default router security recommendations.

Linksys WRT610N

It is a dual-band wireless Linksys router that supports 2.4Ghz and 5Ghz wireless clients simultaneously. It also supports media-optimized networking technology, streaming music, videos, and high definition and quality gaming. When it is connected to an external hard drive, it acts as a network-attached storage device.

Linksys e4200

It is a type of Linksys router that comes with a built-in UPnP AV media server and shared Storage of USB port. It also supports 450MB/second throughput in the 5Ghz band and a dual-band of 2.4 and 5Ghz. It also provides compatibility with 80211.n,g,b, and standards and USB 2.0 port to support external network storage.

These are the most popular and usable Linksys router types used by people more than other types. Apart from these types, other types of Linksys router are Linksys e1000, Linksys WRt54gl, Linksys e2000, Linksys wrt300nb, etc. Each different type of router has its own features, so choose wisely.

Requirements to install or setup Linksys Router

If you are going to setup Linksys router, then there are few requirements to execute this process, which you have just because, without these things, you may not be able to set up your Linksys router. You must have the following things;

• Connect software
• Internet connection
• Ethernet cable
• Laptop or PC
• Power supply or charger
• USB Cable
• Network Cable
• Device manuals
• Driver Disc

How to setup Linksys Router

To enjoy a smoother and faster internet connection, you need to set up a Linksys router, but few people are not aware of its setup process, and the most commonly ask, “How do I set up my Linksys router?” You can easily set up your Linksys router by following a set of instructions; here, we will describe the step wise process for configuring or setting up your router. But remember, the process of setting up a router could be different for different types of Linksys router.

How to setup Linksys Router WRT54G setup

Most commonly uses this type of router because it features an easy-to-use web interface for setup. Below a stepwise procedure is defined for the Linksys router WRT54G; this process is quite similar to G or N models. Follow the below-described steps to complete this process.

Step 1: First, you need to plug in your Linksys router WRT54G into a power source, so that you are able to initiate your process.

Step 2: Now, you need to insert an Ethernet cable into a cable modem port. If you don’t have an Ethernet cable jack, then you need to install it at your place.

Step 3: Now, you need to plug in your Ethernet cable in the back of your Linksys router, where “Internet” is marked and from the other side of the Ethernet cable plug it in the inappropriate port of your laptop or computer. Make sure that your Ethernet cable should be a plugin into the “1-4” label of the router.

Step 4: On your laptop or computer, open a web browser.

Step 5: In your web browser bar, enter 192.168.1.1 and press the “Enter” key.

Step 6: Now, you need to fill the user login and password section. In user login, enter “admin” and in the password field, enter your suitable “password.” After trying this, if you are still unable to log in, remove your “admin” login and try it again.

Step 7: To avoid confusion with other routers of your area, change your “Router name” on the “Setup page.” You will see here a default router name change it with a unique name.

Step 8: Now you need to select “Save settings,” and after that, click on “Continue” , then “Settings are successful” menu dialog is complete.

Step 9: At the top of the Linksys router setting screen, choose the “Wireless” menu tab.

Step 10: It’s time to change “SSID” or “Wireless Network Name” into a unique name, if possible or required, then you can use the same router name as you entered earlier.

Step 11: Now, disable the “Wireless SSID Broadcast” menu option and then select the menu button of “Save settings,” Click on the “Continue” menu button after the “Settings are successful” dialog box is displayed.

Step 12: At the top of your screen, a sub-menu is located, select Wireless- Security from it.

Step 13: In the drop-down menu box, use “Security mode” and choose the “WEP” menu option. After that, you need to select “128 bits and 26 hex digits” and enter a password 6 to 8 digits in the passphrases box.

Step 14: Now, you have to select the “Generate” menu button and choose the “Save settings” button.

Step 15: Now, “Settings are successful” menu dialog is displayed, and after this, you need to click on “Continue”. Apart from this option, you can select the WPA encryption algorithm, but it won’t be able to support all network cards.

Step 16: Select “Wireless MAC Filter,” located at the top of the Linksys router setup menu. You have to do this if you want to enable MAC filtering to secure wireless router access.

Step 17: Now, click on the “Enable” menu button, then “Permit only” menu choice, after that “Save settings” button, which is followed by the “Continue” menu option.

Step 18: Now, click on the menu button of the “Edit MAC Filter List” and enter the MAC address so that each computer will be allowed to connect to the network. Select “Save settings” >> “Continue” menu button.

Step 19: Choose the “Administration” menu tab.

Step 20: In the “Router Password” field, enter a new password by changing the default password, and you have to do this for accessing the Linksys router, and after that, confirm the changes. While entering the password, make sure that the password you have entered differs from your WEP encryption password. Click on “Save settings” and then “Continue” menu buttons.

By following these all of the steps, your process of setting up Linksys router WRT54G is completed here. If you have Linksys router WRT54g, then the following steps are beneficial for you to configure or setup Linksys router WRT54G.

How to setup Linksys Router e4200 setup

The basic information about Linksys routere4200 and its features are described above. Before starting the Linksys router e4200 setup, if you are not aware of its fundamental info, you can read it in the above-described router types section, and here we will discuss all the required steps that are used to setup Linksys router e4200.

Step 1: The first step is to connect router e4200 to a power source so that you can go through configuration steps after its power.

Step 2: Connect your DSL modem or cable to the WAN or internet port of the router by using an Ethernet cable. Or you can plug your cable in the dorm room Ethernet port.

Step 3: Connect the Ethernet port of your laptop to the LAN port through an Ethernet cable.

Step 4: Now, you have to insert the setup CD of your Linksys router into the CD/DVD drive of your computer or laptop.

Step 5: Accept the EULA and then click on the “Next” on the menu button to agree on (end’ user license agreement.)

Step 6: when your router finds settings automatically, then you need to enter the required connections and click on “Next” to finish the router setup. By doing this step, you will get two results and which is in the form of a wireless network. The first one is; Primary network, and the second is; guest network. But while doing this process, make sure that if your router doesn’t find settings automatically, then you need to include DSL login, connection types, password.

Step 7: Enter 192.168.1.1 in your laptop browser to access the web-based configuration.

Step 8: If you don’t use a CD for setup in the above six steps, then you need to enter the “admin” for router login and password then clicks on the OK menu button. If you used a CD set up in the above six steps, then you need to enter the password you have already used. You can also create a new password by selecting the “Administrative” and “Management” menu options from the primary configuration screen.

Step 9: Now, you need to select “Basic Setup” and “Setup” menu options, and after that, select ” Language.”

Step 10: Now click on the menu section, “Internet Setup,” then enter the connection specified, which is provided by your respective school or ISP.

Step 11: Find out ISP uses PPPoE and select it when connecting via; DSL. Now, enter your username, password, and services name, if it is necessary or required.

Step 12: If your ISP charges you according to the time of the connection to the internet, then you should toggle the “Keep-Alive” menu option to “Connect on Demand.”

Step 13: Now, you need to select “Basic Wireless Settings” and “Wireless”  menu options.

Step 14: You can manually configure the network on the router or select “Wi-Fi protected setup.” 

Under the configuration view, to set up 2.4ghz to 5ghz network on your router.

Step 15: whenever you are doing the manual setup of your router, remember that Linksys router 802.11 b and Linksys router 802.11 g cannot connect the 5Ghz network. So choose carefully that device that can support 2.4 GHz and 5Ghz network options and make sure that appropriate options are selected under the 2.4Ghz network. In simple words, in this step, you need to ensure that the lowest standard of connection would be supported on this network, in your home or apartment.

Step 16: If you are an advanced user on the screen, then you need to disable the SSID broadcast to make the desired changes in the channel width, numbers of assignments, and network security.

Step 17: To select between, WPA2 or WPA mixed mode, WPA personal WEP and WPA 2 security standards, select “Wireless security” and “Wireless” option. From all of these, WPA2 is the highest security option on your router.

Step 18: There are two conditions, if you don’t want to allow “Guest access” to surf the internet using 2.4Ghz network then you need to select “Guest access” and “wireless” from the main router setup menu option, and also change the setting to “No.” But if you don’t want to allow Guest access to surf, then the default option is to do so.

Step 19: Now, Mac address filtering can be configured and enabled on the e4200N router, as like WRT54G Linksys router setup.

Step 20: Now, you need to configure advanced options on your router like; firewall, VPN pass-through, Network storage, FTP server, Gaming option, parental control, media server, etc.

Step 21: Now, a portable hard drive is needed to enable network storage and connect to a router. If you want to disable this feature, then you need to select Storage>> Administration and then  Disabled, which is located under “Anonymous Disk Access.” In the Storage and administration menu option, your Linksys router implements a group or user account policy. A shared folder can be used to manage network access on different networks with individual folders.

Step 22: Now, save the settings, and your Linksys router e4200 setup process will be complete.

Linksys router Firmware

Linksys router has a feature in which you don’t need to update its firmware; whenever you connect your router to the internet, it allows the end-user to update the router firmware. To access this feature of the Linksys router, you must follow a few steps.

Step 1: Select the Administrative menu tab on the router setup screen.

Step 2: Now, choose the “Firmware Upgrade” menu option.

After that, your Linksys router firmware automatically starts upgrading; before doing these steps, make sure that your router setup options typically reset all Linksys router settings, and it doesn’t recommend users to upgrade router firmware until a new feature will be released or any experiencing issue. If you want to get the latest information about firmware upgrades and downloads, then you can visit the Linksys Support page, here you will get all the information.

As you can see, whether you are using a laptop or computer, you can set up your Linksys router effortlessly and easily by following the above-described steps for your relevant Linksys router. Those who are looking for a solution to “How to setup Linksys router?” 

In this content, they will get a step-wise solution for almost all types of Linksys router and relevant information about its different types. Follow this guide quickly and access internet connections on your computer or laptop by setting up your Linksys router.