Undoubtedly, HP printers are most widely used for both small and large businesses. This brand has established a good value in the market. These printers are well-known for their class quality. But sometimes HP Printers show minor and major issues like HP Printer not printing black.

Most of the users have been facing this type of issue and causes trouble to them. Various reasons are so minor that we usually ignore them and start encounter HP printer black ink not printing issues. Therefore, in this article, we have tried to describe all possible solutions that help you in fixing the HP printer not printing Black.

Why does your HP printer not printing black?

Usually, we won’t face any issues with HP Printer but some instances can lead us to various small issues. One of the issues is the HP printer not Printing Black. So, here are some of the common reasons that cause this issue.

1: Printhead problem.

2: Wrong Cartridges problem.

3: Printer drivers Problem.

4: Paper Settings problem.

5: Ink Level.

So, these are some of the most common issues that cause HP Printer black, not printing. Before you deal with this issue you need to know its troubleshooting solutions for fixing this problem.

How to Fix HP Printer not printing Black on Windows 10?

There are several simple and quick solutions that the user can use to fix the HP Printer not printing black. All these solutions apply to HP Printers. So, follow the methods given below and get rid of the HP printer not printing black text.

Solution 1- Check the Level of Ink:

 Follow the below-given steps to check the level of ink to fix HP Printer not printing Black :

1: First, you need to replace the ink cartridges that are low or empty.

2: You need to make sure that ink cartridges are break into a place and are properly installed in their appropriate slot.

3: If you have installed a new ink cartridge then make sure that you have removed the tape over the vent.

4: Now, check if the vent of the cartridges is clogged and if it is not then you can fix this by using a pin to clean up the clog.

5: Next, you can try using a different ink cartridge to determine that your printer can recognize cartridges.

Solution 2- Reinstall Printer Driver:

However, if you cannot print color from a Windows computer then you first need to uninstall and then reinstall the printer software. You can also skip this step if you find that your printer can print in color.

For re-installing the HP printer driver follow these given steps:

1: First, you need to remove the printer from the devices list.

2: While removing the printer from the devices list, you need to go to Uninstalling the printer software.

3: Now, go to HP Software and Driver Downloads and then install the latest software for your Printer.

Solution 3- Clean the Ink Cartridge:

Refer to these given steps to clean the Ink Cartridge:

1: First, you need to make sure to load the input tray with either plain or white paper.

2: On the printer control panel, swipe the display to the left then touch setup.

3: Now, touch Tools, and then touch Clean Cartridges.

4: Now, the printer prints a Diagnostic report and if the print quality is acceptable then you can click on No and start troubleshooting.

5: If the print quality is unacceptable, then click “Yes” when prompted to perform another level of cleaning.

Solution 4- Open Printer Troubleshooter:

Learn these given steps to open Printer Troubleshooter:

1: Firstly, click the Start button and then click Control Panel and then Devices and Printers.

2: Now, double-click your Printer.

3: Next, you need to look at the Status column to see if the has been failed.

4: Now, Right-click the failed print job and then select “Cancel all documents” from the pop-up menu.

5: Click yes when asked to confirm.

Solution 5 – Clean Print head:

Well, it is very common for the print head to clog the ink after being used for quite some time. You can follow the below-given mentioned steps to clean the print head and get your HP printer to print back again.

1: Firstly, you need to disconnect your printer from the power source and then open the cover of your printer.

2: Now, remove the ink cartridge and then clean it thoroughly.

3: Next, insert the print cartridge and then connect the printer to the power source.

4: Now, run the automated startup sequence.

5: Next, print a test page to check if your HP printer is printing black now.

Solution 6 –Align the Print head:

While aligning the ink cartridges helps incorrectly align the print head. For this, you need to align the printer from the printer control panel and then evaluate the results.

Follow these given steps:

1: First, you need to make sure that you load the input tray with plain and white paper.

2: On the Printer Control panel, you need to swipe the display to the left and then touch the Setup button.

3: Now, touch Tools OR Printer Maintenance.

4: Next, swipe up on the display and then touch the Align Printhead.

5: Now, wait for the alignment page to fully eject from the printer.

6: Lift the scanner lid.

7: Place the alignment page with the print side and then position it according to the engraved guides around the glass.

8: Now, close the scanner lid and then touch OK.

9: Here the printer aligns the ink cartridges.

10: Try to print again as this has been solved your issue and if not then continue with the next step.

Solution 7 – Use Automated Tool to Clean Print head:

Perform the below-given steps to clean print head:

1: Firstly, open HP solution Center.

2: Now, click Settings and then click on Printer Toolbox.

3: Here the printer toolbox opens.

4: Next, click the Device Services tab and then click Clean Print heads.

5: Now, click Clean to begin the cleaning process and then follow the on-screen instructions to complete the process.

6: Here a test page prints once the cleaning process gets completes.

7: Now, recycle or discard the test page.

Solution 8 – Print in Backup Mode:

Follow these steps to print in backup mode:

1: First open the product cover and then wait for the carriage to move to the middle of the product.

2: Now, press down gently on the empty cartridge and then pull it away from the product to remove it from the cartridge.

3: Next, you need to make sure that the remaining cartridge is seated correctly.

4: Now, close the product over and then Ink backup mode starts initiated.

Frequently Asked Questions (FAQ’s)

Q1: How you can fix HP Printer that is printing blank?

Ans: Follow these steps to fix the HP printer that is printing black:

1: First, you need to check the estimated ink levels.

2: Now, replace the low or empty cartridges.

3: Next, align the printer.

Q2: What to do if the printer is not printing?

Ans: Learn these steps if your printer is not printing:

1: Check your Printer Error lights.

2: Now, clear the printer queue.

3: Next, solidify the connection.

4: You need to ensure that you have the right printer.

5: Install the Drivers and Software.

6: Now, add printer.

7: Next, check the paper that is installed but not jammed.

8: Fiddle with the ink cartridges.

Q3: How you can clean the print heads on HP Printer?

Ans: 1: Firstly, you need to open an HP solution center.

2: Now, click Settings and then click Printer Toolbox.

3: Next, click the Device service tab and then click the Clean Print heads.

4: Click Clean to begin the cleaning process and then you need to follow the on-screen instructions to complete the process.

Q4: How you can fix dull printing?

Ans: 1: Firstly, you need to print the Printer settings report.

2: Now, adjust the Print density in the printer driver.

3: Next, send a print job to the machine and then review the print quality.

4: Now, turn off the toner save mode.

5: Next, perform a manual drum cleaning.

Q5: How you can reset the HP printer

Ans: 1: Firstly you need to turn off the printer.

2: Now, disconnect the power cable from the printer for at least 30 seconds and then try to reconnect.

3: Turn the printer on while you press and hold the resume button for 10 seconds and until the attention light turns on.

4: Now, release the resume button.

Final words

While following all the above-given steps you will be surely able to get rid of your printer problem of the HP printer not printing black. You can perform these steps one by one and see which step is going to help in resolving this problem.

Hopefully, your HP printer can work properly now as we defined all possible solutions for fixing this issue. However, if these solutions won’t work accurately then you can contact our expert team of technicians who got experience in solving printer-related issues.

You can communicate with us via chat and get help from us. So, feel free to contact our team of members for more assistance and we assure you that we deliver hassle-free solutions to get rid of this problem. We are 24/7 available at your service so don’t hesitate to contact us and get reliable help from our professional experts.